Optimal 50 Light
Light sliding walls
Optimal 50 Light mobile aluminum wall system makes it possible to divide premises with use of light modules that are made of circumferential plate-filled aluminum frame.
Possibility to mount modules at any location also in the cavity.
Modules are sliding manually, one after another.
Due to module strutting, acoustic and physical barrier is created.
The wall divides premises, allowing their arrangement in accordance with current needs.
Optimal 50 Light walls consist of light modules that are 80 cm – 130 cm wide and the height of which corresponds to the conditions of the premises. The wall is 5 cm thick.
Modules are suspended in the aluminum runway that is mounted in the ceiling surface.
Optimal systems do not require any cumbersome floor guides.Technical catalog
- circumferential aluminum frame
- aluminum strutting-locking mechanism
- runway carrier
- strutting base board
- strutting ceiling board
- plate filling
|Wall thickness||50 mm|
|Acoustic isolation||Rw = 32dB|
|Wall height||up to room height|
|Module width||860-1300 mm|
|Suspension||1 or 2 point|
load bearing ceiling fixing, short
load bearing ceiling fixing, medium
load bearing ceiling fixing, long
ferroconcrete binder fixing, lateral
suspension on a steel beam, no load-bearing ceiling
Another advantage of our system is the possibility of placing on the bottom section of the wall, single-winged key-closed door.
The door are the integral part of the wall in terms of visual and operational.
Sound insulation of Optimal 50 Light system is Rw = 32 dB.
Optimal 50 Light system has undergone the complete set of tests at the Building Technique Institute in Warsaw.
Our sliding walls have been tested for:
– safety of use
– load resistance
– correct operation
– sound insulation
– response to fire NRO
All the tests were positive within the upper tolerances for the product.
If you are considering a wall of other manufacturer, ask them about tests at the Building Technique Institute and come back to us!